HKQF-600A Concrete Floor Saw

Home/Uncategorized/HKQF-600A Concrete Floor Saw

HKQF-600A Concrete Floor Saw

$3,200.00 $1,600.00

HKQF-600A Concrete Floor Saw is an economical item introduced by our business. The maker has the functions of low noise and high reliability. The machine embraces diamond saw blade, quickly cutting speed, cool and beautiful cutting edge. The machine is equipped with forward guide bar to ensure precise cutting direction. It appropriates for cutting different kinds of concrete, asphalt pavement, plaza, factory growth joints; and other kinds of concrete elements of all type of grooving and cutting.

Category:

Description

Date sheet of the HKQF-600A Concrete Floor Saw

Linear velocity 47-50 m/s
Maximum cutting 23 cm
Weight 380 kg
Volume of water tank 55 L
Blade Diameter 600 cm

Concrete Floor Saw is a small cutting device powered by gas or diesel motor. The machine can cut tarmac, concrete pavement, marble slab pavement, terrazzo pavement and all kinds of concrete elements after installing Jin Gang stone saw blade. It can be commonly utilized in roadway building and construction, developing construction, stone processing, cement parts and other markets without power supply centers.
Concrete Floor Saw has basic structure, small size, versatile operation, labor saving, low vibration, straight and stunning cut, high efficiency, it is a typical machine for cutting in the above industries. Triangle belt driven rotation. The front of the pusher is equipped with a handwheel to change the cutting depth, and turning the handwheel can alter the range between the front and rear travel wheels, and the saw blade will then fall or rise. There is a water tank at the back of the machine body for cooling the saw blade.

The usage approach of concrete saw
The rotating direction of the old cutter disc can be determined by the grinding marks of diamond particles, it is strictly forbidden to turn the cutter disc forward and backward. Each time before starting the Concrete roadway saw, inspect the steering and tightness of the cutter disc, and lower the guard.
The operator should use insulated gloves and shoes when working.
When the Concrete roadway saw is being cut, the nut of the blade clamp should be tightened and the safety guard should be intact. The cooling water ought to be switched on before cutting, and cutting must be stopped when the cooling water is interrupted.
When cutting, the blade ought to be cut in slowly, and take notice of the cutting depth indication, when there is a large cutting resistance, the blade needs to be raised right away to check.
Cutting procedure, into the knife, knife back slowly, cutting advance should be consistent, can not use the knife plate single-sided cutting, in order to prevent the knife plate contortion and damage. At the same time should also pay attention to the water tank water level, when the water level drops to the tank height 1/2 below, to add water in a prompt way, no cooling water cutting is strictly forbidden.

Cutting procedure, into the knife, knife back gradually, cutting advance should be consistent, can not utilize the knife plate single-sided cutting, in order to prevent the knife plate contortion and damage. At the same time needs to also pay attention to the water tank water level, when the water level drops to the tank height 1/2 listed below, to include water in a timely way, no cooling water cutting is strictly prohibited. Cooling water ought to be intended at the blade and slit, the jet should be consistent.

If you want to know more about the concrete saw, please check: Concrete Cutter

Additional information

Engine

Handa, Longxin, B&G, Honda, Changgong

Reviews

There are no reviews yet.

Be the first to review “HKQF-600A Concrete Floor Saw”

Your email address will not be published. Required fields are marked *

Go to Top