HKQF-800A Concrete Cutter Machine is a cost-efficient product released by our company. The device has the functions of low sound and high reliability. The device adopts diamond saw blade, fast cutting speed, beautiful and neat cutting edge. The machine is equipped with forward guide bar to make sure accurate cutting direction. It is suitable for cutting various types of concrete, asphalt pavement, plaza, factory expansion joints; and other types of concrete components of all sort of cutting and grooving.
HKQF-800A Concrete Cutter Machine
Date sheet of the HKQF-800A Concrete Cutter Machine
|Linear velocity||47-50 m/s|
|Maximum cutting||27 cm|
|Volume of water tank||55 L|
|Blade Diameter||800 cm|
HKQF-800A Concrete Cutter Machine is a little cutting machine powered by gasoline or diesel engine. The machine can cut tarmac, concrete pavement, marble piece pavement, terrazzo pavement and all type of concrete components after setting up Jin Gang stone saw blade. It can be extensively used in road building and construction, constructing construction, stone processing, cement components and other industries without power supply centers.
HKQF-800A Concrete Cutter Machine has basic structure, little size, versatile operation, labor saving, low vibration, straight and lovely cut, high efficiency, it is a common machine for cutting in the above industries. Triangle belt driven rotation. The front of the pusher is geared up with a handwheel to change the cutting depth, and turning the handwheel can change the range in between the front and rear travel wheels, and the saw blade will then increase or fall. There is a water tank at the back of the machine body for cooling the saw blade.
The usage method of HKQF-800A Concrete Cutter Machine
The rotating direction of the old cutter disc can be identified by the grinding marks of diamond particles, it is strictly forbidden to turn the cutter disc forward and backwards. Each time prior to beginning the Concrete roadway saw, check the steering and tightness of the cutter disc, and lower the guard.
When working, the operator must wear insulated gloves and shoes.
When the Concrete roadway saw is being cut, the nut of the blade clamp should be tightened and the safety guard must be undamaged. The cooling water needs to be turned on prior to cutting, and cutting must be stopped when the cooling water is disturbed.
When cutting, the blade should be cut in gradually, and take notice of the cutting depth sign, when there is a big cutting resistance, the blade should be raised instantly to inspect.
Cutting procedure, into the knife, knife back slowly, cutting advance needs to be uniform, can not utilize the knife plate single-sided cutting, in order to prevent the knife plate deformation and damage. At the very same time should likewise pay attention to the water tank water level, when the water level drops to the tank height 1/2 below, to include water in a timely way, no cooling water cutting is strictly forbidden.
Cutting procedure, into the knife, knife back slowly, cutting advance must be uniform, can not use the knife plate single-sided cutting, in order to prevent the knife plate contortion and damage. At the very same time must likewise pay attention to the water tank water level, when the water level drops to the tank height 1/2 listed below, to add water in a timely manner, no cooling water cutting is strictly prohibited. Cooling water ought to be intended at the blade and slit, the jet should be consistent.
If you want to know more about the concrete cutter, please check: Concrete Cutter
Handa, Longxin, B&G, Honda, Changgong